HU Hong
Address:
Department of Mechanical Engineering and Automation, Harbin Institute of Technology Shenzhen Graduat (518055)
Email:
honghu@hit.edu.cn
Phone:
86-755-26033811
86-755-26032774(Fax)
PERSONAL PROFILE
 
RESEARCH INTEREST
 
1、Mechatronics and intelligent system
2、Sensors and precision instruments
3、Theory of linear and nonlinear control system
4、Micro-electromechanical Systems
EDUCATION  
July, 2003
Ph.D. Mechanical and Industrial Engineering University of Toronto,Toronto, Ontario
1991
M.Sc. Precision Engineering Sichuan University, Chengdu, China
1985
B.Sc. Electro-mechanical Engineering University of Electronic Science and Technology of China, Chengdu, China
RESEARCH & WORK EXPERIENCE  
1998-2003
Research Assistant Department of Mechanical and Industrial Engineering, University of Toronto
2002
Researcher Engineer Sensor Technology Limited, Collingwood, Ontario, Canada
1995-1998
Associate Professor Department of Electro-Mechanical Engineering, University of Electronic Science and Technology of China, Chengdu, China
1995-1998
Associate Chairman Department of Electro-Mechanical Engineering, University of Electronic Science and Technology of China, Chengdu, China
1991-1995
Assistant Professor Department of Electro-Mechanical Engineering, University of Electronic Science and Technology of China, Chengdu, China
1985-1988
Electro-mechanical Engineer Hongming Special Electronic Equipment Limited, Chengdu, China
PROFESSIONAL QUALIFICATION & ACADEMIC SERVICE
 
Present
Member, IEEE, SPIE.
Present
Member, China Society of Mechanical Engineering.
Present
Member, China Society of Electrical Engineering.
1997
Conference Session Co-Chair, Proceedings of the 2nd China-Japan Symposium on Mechatronics, Chengdu, China, 1997.
2002-Present
Reviewer, Precision Engineering.
2003-Present
Reviewer, Automatica (IFAC Journal).
RESEARCH PROJECTS
RESEARCH ACHIEVEMENT & AWARDS
2001-2003
Ontario Graduate Scholarship, Government
2000-2001
University of Toronto Open Fellowship, University of Toronto
1996
Outstanding Science and Technology Researcher, Government of Sichuan Province, China
1995
Excellent Young Scientist, Ministry of Electronic Industry of China, Only 100 young researchers received the honors in China at 1995
1995
Second Class Award for Scientific and Technological Progress of the Assembly Measurement System on Truck’s Axles, Ministry of Electronic Industry of China, Highest honors for Chinese researchers
1994
Second Class Award for Scientific and Technological Progress of the digital audio magneto optical disk recorder, Ministry of Electronic Industry of China, Highest honors for Chinese researchers
1988-1991
University Scholarship, Sichuan University
1981-1985
University Scholarship, University of Electronic Science and Technology of China, Ranked first in the class of 60 students
PATENT
   
PAPER & BOOK PUBLICATIONS
Recent Three Years' Publications
1. P. Zhang, H. Hu and F. Muhammad, High frequency passive micro-magnetic sensor based on surface acoustic wave transponder and giant magnetoimpedance sensitive element. Sensors and Actuator, A 254 (2017) 54-60. (SCI, IF=1.903)
2. J. X. Wang, H. Hu, A. P. Ye, J. Chen and P. Zhang. Experimental investigation of surface acoustic wave atomization. Sensors and Actuator A, 238(2016): 1-7. (SCI, IF=1.903)
3. S. Wei, H. Hu and S. Y. He. A Two-PZT Beam Impact-excited Energy Harvester. Ferroelectrics, 2015, 487 (1) 126-137 (SCI, IF=0.469)
4. J. Y. Xu, H. Hu and Y. L. Lei. Morphological features of silicon substrate by using different frequency laser ablation in air and water. Applied Surface Science, 317 (2014) 666–671. (SCI,IF=2.538)
5. B. Zhang, H. Hu and T. Li. A surface acoustic wave sensor for the treatment of hydrocephalus. Journal of mechanics in medicine and biology, 2014 14(6), 144000-5-1440005-9. (SCI,IF=0.803)
6. Y. Dong, H. Hu and H. Wang. Identification and experimental assessment of two-input Preisach model for coupling hysteresis in piezoelectric stack actuators. Sensors and Actuators A, 220 (2014) 92–100. (SCI,IF=1.943)
7. Y. Dong, H. Hu and Z. Zhang. Constructive proof of Preisach right inverse with applications to inverse compensation of smart actuators with hysteresis. ASME Transactions on Dynamic systems, Measurement and Control, 2014 136(6) pp. 064502-1-7. (SCI,IF=1.039)
8. Z. Wan and H. Hu. Modeling and experimental analysis of the linear ultrasonic motor with in-plane bending and longitudinal mode. Ultrasonics, vol. 54, no. 3, pp. 921–928, 2014. (SCI,IF=2.028)
9. S. Wei, H. Hu and S. Y. He. Modeling and experimental investigation of an impact-driven piezoelectric energy harvester from human motion. Smart Materials and Structures. 2013 22(10): 105020. (SCI,IF=2.449)
10. H. Liu, H. Hu, K. L. Yung, Y. Xu and X. W. Zhan. Melt pressure signature tracking using an adaptive kalman filter in microinjection molding. Advances in Mechanical Engineering, 2014, 656, 413-422. (SCI, IF=1.062)
11. B. Zhang, H. Hu and R. Ben Mrad. Characterization of a multilayered SAW pressure sensor with low temperature variability. Applied Mechanics and Materials, Vol. 656, pp 413-422, 2014/9. (EI)
12. Y. Lei, H. Hu and J. Xu. A method of small-field-of-view and binocular camera calibration by using a wafer. Proceeding of the IEEE International Conference on Information and Automation Hailar, China, July 2014, pp478-483. (EI)
13. Z. J. Zhang and H. Hu. A general strategy for geometric error identification of multi-axis machine tools based on point measurement. International Journal of Advanced Manufacturing Technology, (2013) 69:1483–1497. (SCI, IF=1.205)
14. Z. J. Zhang and H. Hu. Three-point method for measuring geometric error components of linear axis and rotary axis based on laser tracker. Journal of Mechanical Science and Technology. 2013, 27(9), pp. 2801-2811. (SCI, IF=0.616)
CONFERENCE PAPERS/TALKS
 
Recent Three Years' Conference Papers
1. Xiaolong Li, Hong Hu, Wenhua Ding. Two Error Models for Calibrating SCARA Robots based on the MDH Model[C]// International Conference on Mechanical, Automotive and Materials Engineering, Chengdu, 2016. (EI)
2. Wei Song, Huaiyuan Liu, Bin Xiang,Hong Hu. The Application of Haar Classifier in High Voltage Transmission Line Obstacle Target Detection[C]//IEEE CSMA, 2016. (EI已收录)
3. Qing Zhou, Huaiyuan Liu, Xiaorui Hu, Hong Hu. The Application of Relative Moment and Wavelet Moment in Target Obstacle Recognitio [C]//International Conference on Information and Automation, Ningbo, 2016. (EI)
4. Ling Dai, Yifan Chen, Hong Hu, Min Zhou. Millimeter-wave Image Target Recognition Based on the Combination of Shape Features[C]//International Conference on Information and Automation, Ningbo, 2016. (EI)
5. Lei Han, Hong Hu, Wenhua Ding,Jiyu Li.Tension control methodology of active continuous discharge and intermittent reciprocating work based on master-slave synchronous motion [C]// International Conference on Mechanical, Control and Computer Engineering. 2016.(EI)
6. Zhang B, Hu H, Ben-Mrad R. Characterization of a Multilayered SAW Pressure Sensor with Low Temperature Variability[J]. Applied Mechanics and Materials. 2014, 656: 413-422. (EI)
7. Bing Zhang,Hong Hu. A FEM simulation approach for multilayered SAW delay line devices [C]. IEEE International Conference on Robotics and Biomimetics,ZhuHai:2015:970-975.(EI:15806825)
8. Bing Zhang,Hong Hu,AiPeng Ye and Fang Cao. A Surface Acoustic Wave Resonator Type Sensor for Measuring Temperature [C]. 2015 International Conference on Computer Science and Mechanical Automation,Hangzhou:2015:162-165.(EI:15717559)
9. L.Wang, K. Alemzadeh and H. Hu, “Review of Current Available Dental Articular Simulators ” , Applied Mechanics and Materials, Vol. 461 (2014) pp 623-632. (EI )
10. Dong Y Y,Hu H,Lin W. Adaptive control of Piezoelectric Stack Actuators with Coupling Hysteresis for Dynamic Loading Applications[C]. Proceeding of the 11th World Congress on Intelligent Control and Automation (WCICA),Shengyang,China. 29 Jun. - 4 Jul. 2014:1555-60. (EI)
11. Dong Y Y,Zhang Z J,Hu H. Development of an Upper Body Humanoid Robot[C]. 2014 IEEE International Workshop on Advanced Robotics and its Social Impacts (ARSO). Evanston,Illinois,USA,11-13 Sept. 2014:143-148. (EI)
12. Y. Lei, H. Hu and J. Xu, “A Method of Small-Field-of-View and Binocular Camera Calibration by Using a Wafer”, Proceeding of the IEEE International Conference on Information and Automation Hailar, China, July 2014, pp478-483. (EI)
13. Z. Song, X. Yang, B. Li and H. Hu , “ A Modular Modeling Approach for Planar Linkage Mechanisms Considering Clearance Effects,” Proceeding of the IEEE International Conference on Robotics and Biomimetics (ROBIO) Shenzhen, China, December 2013, pp. 2470-2475. (EI)
TEACHING/SUPERVISING EXPERIENCE
Teaching Assistant at University of Toronto, Ontario, Canada
Control Systems I, MIE404F (senior)
Mechatronics Principles, MIE444F (senior)
Advanced Mechatronics, MIE1809S (graduate)
Teaching Courses at University of Electronic Science and Technology of China, Chengdu, China
Engineering Graphics (sophomore)
Design and Manufacture I (junior)
Introduction to Industrial Robotics (senior/junior)
Control Systems (senior/junior)
Mechatronics and Its Applications (senior)
Advance Artificial Intelligence (graduate)
Updated:2017-10