TENG Jun
Address:
HITSGS Campus, Shenzhen University Town, Shenzhen, China (518055)
Email:
tengj@hit.edu.cn
Phone:
+86-755-26033806
+86-755-26033509(Fax)
PERSONAL PROFILE
 
RESEARCH INTEREST
 
Structural seismic design and wind resistant design, High-rise structural system, Large space steel structure, Bridges, Structural vibration control, Structural health monitoring, City and project safety and disaster prevention and mitigation
EDUCATION  
1989-1992
Ph.D. in structural mechanics, Harbin Institute of Technology (Harbin Institute of architecture and Engineering), China.
Thesis: ‘ Optimization theory and methods of structural vibration control ’
1987-1989
Master. in structural mechanics, Harbin Institute of Technology (Harbin Institute of architecture and Engineering), China.
Thesis: ‘Active adaptive control of structure under earthquake ’
1983-1987
Bachelor in civil engineering, Shenyang Institute of architecture and Engineering, China.
RESEARCH & WORK EXPERIENCE  
2010-
Professor, PhD student supervisor. School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Professor Group in School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Shenzhen Key Laboratory of City and Civil Engineering Disaster Prevention and Reduction
2005-2010
Professor, PhD student supervisor. School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Professor Group in School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Shenzhen Key Laboratory of City and Civil Engineering Disaster Prevention and Reduction
2004-2005
Professor, PhD student supervisor. School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Professor Group in School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Shenzhen Key Laboratory of City and Civil Engineering Disaster Prevention and Reduction
Director, Research Center on Bridge and Structural Engineering
Professor, PhD student supervisor. School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Department of City and Civil Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Research Center on Bridge and Structural Engineering
2003-2004
Professor, PhD student supervisor. School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Director, Synthesized Research Center in Harbin Institute of Technology Shenzhen Graduate School
Director, Department of Civil Engineering
2003-2003
Visiting Professor, Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University
2002-2003
Senior Professional Engineer, National First Class Registered Structural Engineer
Vice President, First Design Institute in Shenzhen General Institute of Architectural Design and Research
2000-2002
Senior Professional Engineer, National First Class Registered Structural Engineer
President Assistant, First Design Institute in Shenzhen General Institute of Architectural Design and Research
2000-2001
Associate Researcher, Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University
1994-2000
Senior Professional Engineer, National First Class Registered Structural Engineer
Director Engineer, First Design Institute in Shenzhen General Institute of Architectural Design and Research
1992-1994
Postdoc Researcher, Tongji University
1984-1986
Teacher, Shenyang Institute of Architecture and Engineering
PROFESSIONAL QUALIFICATION & ACADEMIC SERVICE
 
2001-
Director, International association for structural health monitoring and control (IASC) China branch, China
1998-
Executive member, Structural health monitoring and vibration control professional committee in Chinese vibration engineering society, China
1993-2013
Member, the professional committee of high-rise buildings earthquake resistance in the Architectural Society of China, China
2010-
Committee member, Civil engineering society of earthquake prevention and disaster reduction engineering technology promotion committee, China
2001-
Committee member, Wind engineering committee of bridge and structure engineering in China Society of civil engineering, China
2006-
Committee member, Professional committee of structure vibration control in Architectural Society of China, China
2010-
Committee member, Professional committee of architectural structure collapse in Architectural Society of China, China
2010-
Committee member, Professional committee of architectural structure collapse in Architectural Society of China , China
2007-2011
Member, National Natural Science Fund Evaluation Expert Group, China
1992-
Member, international seminar of experts on Chinese Youth Academic Committee of National Natural Science Foundation, China
2001-
National 1st class Registered Structural Engineer, National registered engineers Management Committee (structure), China
2006
Special allowance of Shenzhen city hall, China
2002-2010
Editor, "Journal of earthquake engineering and engineering vibration", China
2002
Editor, "Journal of world earthquake engineering" China
2005-
Editor, "Journal of Earthquake resistant engineering and retrofitting" China
2008-
Member, Senior titles (professor level senior engineer) review committee in Guangdong Province,China
2001-
Member, Special committee of experts to review high-rise building engineering in Guangdong Province, China
2009-
Executive director, Shenzhen city registered structural engineers association, China
2003-
Director, Shenzhen society of civil engineering, China
2001-
Expert, Shenzhen City Construction Bureau of the construction project bidding transaction evaluation experts, China
2012-
Minjiang scholar Professor, China
2012-
Distinguished professor, Wenzhou University, China
RESEARCH PROJECTS
2013-2016
NSFC Major International Cooperative Research Project: Multi-scale Simulation of Dynamic Disaster for the Complicated High-rise Building(51261120374)
2013-2016
NSFC Project: Seismic Failure Control Study for the Complex Structural System of Tall Buildings Based on the Heterogeneous Platform(51278155)
2010-2013
NSFC Major Project: Study on Design Methodology for the Ultra High-rise Diagrid-tube Building Systems Based on Structural Failure Modes Under Severe Earthquakes(50938001)
RESEARCH ACHIEVEMENT & AWARDS
2010
Science and Technology Award of China Highway Society
2010
Best Paper Award
2009
Hubei Province Science and Technology Award
2008
Guangdong Technology Award
2008
The First Prize of Progress of Science and Technology of China State Construction Engineering Corporation
2008
Science and Technology Advanced Individual Title
2007
Shenzhen Technology Invention Award
2007
The Second National Science and Technology Progress Award
2006
Special Allowance of Shenzhen City Hall
1999
Title of International Chinese Significant AacademicAchievements
1998
The Second Prize of Excellent Design of Shenzhen
1998
The Second Prize of Excellent Design of Guangdong Province
1996
The First Prize of Scientific Papers in Shenzhen
1993
Shanghai Postdoctoral Award Fund Award
1999
Chinese Practical Science and Technology Dictionary
1999
China Science and Technology Library
2013
The Third Award of Guangdong Provincial Science and Technology
2013
Guangdong Province Science and Technology Progress Award - First Prize
PATENT
   
The high-rise structure nonlinear analysis software using accelerated GPU [HSNAS (GPU)]V1.0, (2014SR086353)

The structural two-dimensional displacement and strain monitoring method based on digital image processing, (201410201870.5)

A damper coupled shear wall embedded energy module, (ZL201320130853.8)

Midas to Abaqus model conversion software (MTA) V1.0 , Number: 2011SR081315, Inventor: TENG Jun, LI Zuohua, Date of Authorizing: November 10th 2011

The dynamic vibration and energy dissipation device reducing the vibration response of tower structure, Number: ZL200510102356.7, Inventor: TENG Jun, LIU Hongjun, LIU Wenguang, Date of Authorizing: August 31st 2011

Shear wall link steel plate damper and its using method, Number: ZL200710124547.2, Inventor: TENG Jun, MA Botao, Date of Authorizing: March 24th 2010

The energy dissipation damper reducing the vibration response of large span or overhanging structure, Number: ZL200610035412.4, Inventor: TENG Jun, LIU Hongjun, LIU Wenguang, MA Botao, Date of Authorizing: June 24th 2009

The energy dissipation damper for shear wall coupling beam, Number: 200720170921.8, Inventor: TENG Jun, MA Botao, Date of Authorizing: January 21st 2009

The dynamic vibration and energy dissipation device reducing the vibration response of tower structure, Number: ZL200520120271.7, Inventor: TENG Jun, LIU Hongjun, LIU Wenguang, Date of Authorizing: June 25th 2007

The energy dissipation damper reducing the vibration response of large span or overhanging structure , Number: ZL200620058749.2, Inventor: TENG Jun, LIU Hongjun, LIU Wenguang, Date of Authorizing: July 25th 2007

The manufacture of abrasive a rubber bearings, Number: ZL2005101002611.3, Inventor: LIU Wenguang, TENG Jun, Date of Authorizing: December 22nd 2005

Intelligent health monitoring system for large complex roof of truss structure, Number: ZL200410013359.9, Inventor: QU Weilian, TENG Jun, Date of Authorizing: April 21st 2005
PAPER & BOOK PUBLICATIONS
Jun Teng. Theories, Technologies and Methods on Structural Vibration Control. Science Press. Supported by the national science and Technology Publishing funds, 2009.

Jun Teng, Wei Lu, Yan Cui, Rengui Zhang. Temperature and displacement monitoring to steel roof construction of Shenzhen Bay Stadium. International Journal of Structural Stability and Dynamics. 2015.16:1640020(20 pages). (SCI, 1.059)

Jun Teng, Wei Lu, Runfa Wen, Ting Zhang. Instrumentation on structural health monitoring systems to real world structures. Smart Structures and Systems. 2015.15(1):151-167. (SCI, 1.160, Q2&Q3)

Jun Teng, Houbing Xing, Yiqing Xiao, Chengyin Liu, Hui Li, Jinping Ou. Design and implementation of AMD system for response control in tall buildings, Smart Structures and Systems, 13(2): 235-255, 2014(SCI, 1.160, Q2&Q3)

Bingxiang Yuan, Rui Chen, Jun Teng. Effect of Passive Pile on 3D Ground Deformation and on Active Pile Response, Scientific World Journal, 904186, 2014 (SCI)

Huafu Pei, Jun Teng, Jianhua Yin. A review of previous studies on the applications of optical fiber sensors in geotechnical health monitoring, Measurement, 58: 207-214, 2014 (SCI)

Chengyin Liu, Jun Teng. Modal analysis of a cable-stayed bridge model using a modified Ibrahim Time domain algorithm, Journal of Vibroengineering, 16(6):3033-3044, 2014 (SCI)

Dujian Zou, Tiejun Liu, Jun Teng. Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings, Construction and Building Materials, 55: 46-56, 2014


Wei Lu, Fengqi Wu, Jun Teng, Qiushi Zhou. Estimation on structural responses using multi scale measurements. Scientific China-Technological Sciences, 57(9): 1707-1713, 2014.09. (SCI, 1.113, Q2 &Q3; EI)

Wei Lu, Jun Teng, Yan Cui. Damage identification for large span structure based on multiscale inputs to artificial neural networks. Scientific World Journal. 540806, 2014.05. (SCI, 1.219, Q2)

Wei Lu, Jun Teng*, Youlin Xu, Zhongqing Su. Identification of Damage in Dome-like Structures Using Hybrid Sensor Measurements and Artificial Neural Networks. Smart Materials and Structures, 22: 105014, 2013.10. (SCI, 2.449, Q1; EI)

Wei Lu, Jun Teng*, Yanhuang Zhu. Diagnostic and recovering on spatially distributied acceleration using consensus data fusion, Smart Structures and Systems, 12(3-4): 271-290, 2013.09-10. (SCI, 1.160, Q2&Q3)

Tiejun Liu, Dujian Zou, Jun Teng. The influence of sulfate attack on the dynamic properties of concrete column, Construction and Building Materials, 28(1):201-207, 2012 (SCI)

Jun Teng, Weiliang Guo, Hao Zhang, Zuohua Li. Study of the nonlinear seismic performance of diagrid tube-core tube structures, China Civil Engineering Journal, 45(8): 90-96, 2012

Jun Teng, Mingliu Yang, Houbing Xing. Base isolation structure parameter optimization analysis, China Civil Engineering Journal, 45(2): 156-161, 2012

Zuohua Li, An Li, Jun Teng. A plastic-damage uniaxial compression constitutive of concrete, China Civil Engineering Journal, 45(2): 182-186, 2012

Jun Teng, Ting Zhang, Wei Lu. Structural Stress Identification Using Fuzzy Pattern Recognition and Information Fusion Technique, Journal of Civil Engineering & Architecture, 6(4): 479, 2012.

Chao Li, Yiqing Xiao, Jun Teng, Jinping Ou, Yiyan Chen. Numerical evaluation of pedestrian wind environment using threshold exceedance probability approach. Engineering Mechanics, 29(12):15-21, 2012.

Xuanzhao Shen, Jun Teng. Vibration serviceability assessment method for floor structures based on random walking force and annoyance rate. Journal of Vibration and Shock, 31(22): 71-75+95, 2012.

Feng Qiao, Jun Teng, Houbing Xing. Optimal design of viscous dampers based on the pole assignment method. China Civil Engineering Journal, 45(2):162-167, 2012.

Dujian Zou, Tiejun Teng, Jun Teng, Guilan Yan. Strain rate effect on uniaxial compressive behavior of concrete columns. Journal of Vibration and Shock, 31(2): 145-150, 2012.

Jun Teng, Mingliu Yang, Houbing Xing. Base isolation structure parameter optimization analysis. China Civil Engineering Journal, 45(2):156-161, 2012.

Jun Teng, Shu Yao. A method of earthquake-induced latticed shell damage detection by wavelet packet analysis. Engineering Mechanics, 28(9): 183-188, 2011.

Jun Teng, Zuohua Li, Jinping Ou and Xuefeng He. Fiber damage analysis model for RC beam-column based on EEP super-convergent computation. Science China(technical sciences) , 54(10): 2542-2548, 2011.

Jun Teng, Hubing Tu, Huanlin Mao and Yinliang Qiu. Investigation on Applicability of Pushover Analysis on High-rise Diagnoal Grid Structural System, Advanced Materials Research, 163-167: 3918-3924, 2011.

Weiliang Guo, Jun Teng, Baisheng Rong, Zuohua Li, Hao Zhang. A seismic behavior of a diagrid tube-core tube structure. Journal of Vibration and Shock, 30(4): 150-155, 2011.

Jun Teng, Hubing Tu. Study on the Method of Structural Seismic Performance Evaluation Based on the Damage Spectra, Advanced Materials Research, 163-167: 4324-4330, 2011.

Shu Yao, Jun Teng, YiqingXiao, Feng Xu. Detection of the Support Damage Spatial Steel Structures under Earthquakes based on Shaking Table Test, Theoretical and Applied Mechanics Letters, 1(3),2011.

Jun Teng, Yanhuang Zhu. Optimal sensor placement for modal parameters test of large span spatial steel structural. Engineering Mechanics, 28(3): 150-156, 2011.

Jun Teng, Houbing Xing. Study of key techiniques of online algorithms for AMD control system used in KK100. Journal of Vibration and Shock, 30(11): 230-235, 2011.

Jun Teng, Weiliang Guo, Baisheng Rong, Zuohua Li, Zhijun Dong. Research on seismic performance objectives of high-rise diagrid tube structures, Advanced Materials Research, 163-167: 1100-1106, 2010.

Jun Teng, Wei Lu. Structural damage identification method based on multi-type sensors. Journal of Southeast University(Natural Science Edition), 40(3): 538-542, 2010.

Jun Teng, Botao Ma, Weihua Li, Darui Zhou et. al. Seismic simulation test for coupling beam damper of coupled shear wall structure. Journal of Building Structures, 31(12): 101-107, 2010.

JunTeng, Yanhuang Zhu, Yunjun Lu, Wei Lu. Finite element model updating based on multi-outputs support vector regression. Journal of Vibration and Shock, 29(3): 9-12+47, 2010.

Jun Teng, Zhijun Dong. Energy based seismic resistant performance analysis for high-rise reinforced concrete frame-tube structures. Journal of Building Structures, 31(S2): 1-4, 2010.

Zhijun Dong, Jun Teng, Weiliang Guo. Staged construction analysis and application of mechanical performance on Jingji Commercial Centre. Journal of Building Structures, 31(S1): 409-412, 2010.

Jun Teng, Weiliang Guo, Baisheng Rong, Zuohua Li. Seismic performance research of high-rise diagrid tube-core tube structures, Advanced Materials Research, 163-167: 2005-2012, 2010.

Jun Teng, Zhixiong Lu, Anzhi Yan. Variable Stiffness Control Algorithm for High-rise Buildings of Closely Spaced Frequencies Based on Wavelet Transforms, Journal of Harbin Institute of Technology, 17(5): 600-606, 2010.

Jun Teng, Yanhuang Zhu, Feng Zhou, Hui Li, Jinping Ou. Finite Element Model Updating for Large Span Spatial Steel Structure Considering Uncertainties, Journal of Central South University of Technology, 12(4) : 857-862, 2010.

Jun Teng, Botao Ma, Weihua Li, Hao Zhang, Dongxue Cao. Pseudo-static test for coupling beam damper of coupled shear wall structure. Journal of Building Structures, 31(12): 92-100, 2010.

Jun Teng, Yanhuang Zhu, Feng Zhou, Hui Li, Jinping Ou, Xueyi Fu, Lei Gu. Modal parameters identification of large-span spatial structures based on complex morlet wavelet transform. Journal of Vibration and Shock, 28(8): 25-29, 2009.

Jun Teng, Zuohua Li, Xiaofeng Wang, Xuefeng He. Development and application of concrete material model based on VUMAT platform of ABAQUS. Journal of Building Structures, 30(S1): 218-223, 2009.

Wei Lu, Jun Teng. A method of optimal sensor placement based on data fusion. Journal of Vibration and Shock, 28(9): 52-55, 2009.

Hubing Tu, Jun Teng. SDOF system damage spectra and their application. Journal of Nanjing University of Science and Technology, 33(6): 728-733, 2009.

Anzhi Yan, Jun Teng, Zhixiong Lu, Qinting Wang. The effect of geometrical nonlinearity on the SAVIS device, Journal of Advances in structural Engineering, 11(1): 91, 2008.

Jun Teng, Botao Ma, Baisheng Rong, Hongjun Liu, Zuohua Li. Mechanics analysis and experimental study on energy dissipation damper based on bending and dislocating. Journal of Building Structures, 29(6): 113-119, 2008.

Weidong Lei, Jun Teng, Mohamed Hefny Ashraf, Jian Zhao, Guan Jiong. Experimental study on prediction model for maximum rebound ratio, Journal of Central South University of Technology, 14(1): 115-119, 2007.

Weidong Lei, Jun Teng, Mohamed Hefny Ashraf, Jian Zhao. Transmission ratio (Tn) in the radian direction normal to rock joints in 2-D compressional wave propagation in rock masses, Journal of University of Science and Technology Beijing: Mineral Metallurgy Materials, 13(3): 199-206, 2006.

Zuohua Li, Jun Teng, Baisheng Rong, Hongjun Liu, Botao Ma. Design and analysis for wind-induced vibration control of roof truss of high-rise structure. Journal of Xian University of Architecture and Technology, 38(4): 504-508, 2006.

Weidong Lei, Jun Teng, Mohamed Hefny Ashraf, Jian Zhao, Guan Jiong. Numerical study on maximum rebound ratio in blasting wave propagation along radian direction normal to joints. Journal of Central South University of Technology, 13(6): 743-748, 2006.

Youlin Xu, Jun Teng. Optimum Design of Active/Passive Control Devices for Tall Building Under Earthquake Excitation, The Structural Design of Tall Buildings, 11(2): 109-127, 2002.
CONFERENCE PAPERS/TALKS
 
Yan Cui, Wei Lu*, Jun Teng. Strain monitoring method based on digital image processing techniques. 5th Asia-Pacific Workshop on Structural Health Monitoring. Shenzhen, 2014.12.

Wei Lu*, Yan Cui, Jun Teng. Displacement monitoring method based on digital image processing technology. The 13th International Symposium on Structural Engineering. Hefei, 2014.10.

Wei Lu*, Qiushi Zhou, Jun Teng. Effectiveness analysis on SHM system using multi-agent integration. The 2014 World Congress on Advances in Civil, Environmental, and Materials Research, ACEM14, Busan, Korea. 2014.08.

Jun Teng*, Wei Lu, Rengui Zhang, Fangzhou Lu. SHM system design and application to large span structures. The 2014 World Congress on Advances in Civil, Environmental, and Materials Research, ACEM14, Busan, Korea. 2014.08.

Wei Lu*, Runfa Wen, Jun Teng. Optimal placement of sensor based on data association. The Sixth World Conference on Structural Control and Monitoring, 6WCSCM, Barcelona, Spain. 2014.07.

Jun Teng, Wei Lu*, Rengui Zhang. Long-term performance monitoring of Shenzhen Bay Stadium. The Sixth World Conference on Structural Control and Monitoring, 6WCSCM, Barcelona, Spain. 2014.07.

Jun Teng, Wei Lu*, Fangzhou Lu. Structural health monitoring to multi-type members of Shenzhen Vanke Center in construction phase. The Sixth World Conference on Structural Control and Monitoring, 6WCSCM, Barcelona, Spain. 2014.07.

Wei Lu*, Fengqi Wu, Jun Teng. The aquistion method on structural responses using hybrid sensor measurements. Proceedings of The 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Hong Kong, China, 2013.12

Jun Teng*, Wei Lu. Applications to SHM systems of real structures using intelligent methods. Proceedings of The 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Hong Kong, China, 2013.12

Jun Teng*, Wei Lu, Fengqi Wu. Implementation of Structural Health Monitoring to A Real Large Span Steel Roof and Analysis on Its Stress Identification. The 2013 World Congress on Advances in Structural Engineering and Mechanics-ASEM13. Jeju, South Korea, 2013.09

Jun Teng, Zuohua Li, Haixia Lv, Wei Lu. Analysis on Overall Stability and Seismic Damage Evaluation for Diagrid Tube Structures. International Symposium on Innovation and Sustainability of Structures in Civil Engineering. Harbin, China, 2013.07

J. Teng, Z.H. Li, A. Li, Y.B. Han & Z. Cai. Accurate inelastic structural analysis schemes for high-rise structures under earthquake excitations base on ABAQUS platform.15th World Conference of Earthquake Engineering, 2012.10

Jun Teng, Weiliang Guo, Hao Zhang, Zuohua Li. Research on Seismic Failure Mode and Control of High-rise Diagrid Tube Structures(Invited paper), Proceedings of the International Symposium on Innovation and Sustainability of Structures in Civil Engineering, 2011.

Chunkai He, Jun Teng, Zuohua Li. An Assessment Method of High-rise Structural Earthquake damage Using Measured Floor Acceleration Messages, Proceedings of the International Symposium on Innovation and Sustainability of Structures in Civil Engineering, 2011.

Jun Teng, Xuanzhao Shen. Application of Random Walking Force in Floor Vibration Serviceability Assessment, Proceedings of the International Symposium on Innovation and Sustainability of Structures in Civil Engineering, 2011.

Zuohua Li, Jun Teng and Xuefeng He. Seismic Damage Analysis Model for RC Structures Based on Concrete Plastic Damage Model. 2011 Structures Congress Las Vegas (ASCE 2011), 2011.

Zuohua Li, Jun Teng, Xuefeng He. Fiber Damage Analysis Model for RC Beam-column Based on Concrete Damage Constitutive Model, Proceedings of The 11th International Symposium on Structural Engineering, 2010

Dujian Zou, Tiejun Liu, Jun Teng. Strain Rate Effect on Dynamic Behaviors of Concrete Members, The 11th International Symposium on Structural Engineering for Young Experts. Guangzhou, China, 2010.

Jun Teng, Botao Ma et al. The design, experiment and application of coupling beam dampers, The Fourth International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 2010.

Jun Teng, Haixia Lv, Hongjun Wu, Yu Hu, Qi Na. Space Mechanical performance Study of High-pier and Small-radius Curved Bridges(conference Invited), Proceedings of the International Symposium on Life-cycle Performance of Bridges and Structures, 2010.

Jun Teng, Yanhuang Zhu. Parameters Optimization of Wavelet Transform in Modal Parameter Identification with Closely Spaced Modes(Invited paper), Proceedings of the Intelligent Sensors and Actuators Symposium at Earth & Space 2010 Conference, 2010.

Jun Teng, Wei Lu. Efficient Structural Health Monitoring by Limited Strain measurements(Invited paper), Proceedings of the Intelligent Sensors and Actuators Symposium at Earth & Space 2010 Conference, 2010.

Jun Teng, Yanhuang Zhu, Wei Lu, Yiqing Xiao. The Intelligent Method and Implementation of Health Monitoring System for Large Span Structures(Invited paper), Proceedings of the Intelligent Sensors and Actuators Symposium at Earth & Space 2010 Conference, 2010.

Anzhi Yan, Jun Teng, Zhixiong Lu. Implementation of frequency tuning of SATMD using new WT method, 2009 WRI World Congress on Software Engineering, 2009.

Jun Teng, Xuefeng He, Zuohua Li. Seismic Damage Assessment of High-rise RC Structures Based on Material Damage Model(Invited paper), Proceedings of International Symposium On Innovation & Sustainability Of Structures In Civil Engineering, 2009.

Yanhuang Zhu, Jun Teng. Finite Element Model Updating Based on Genetic Support Vector Regression, Proceedings of International Symposium On Innovation & Sustainability Of Structures In Civil Engineering, 2009.

Jun Teng, Wei Lu. Damage Identification Method Based on Structural Dynamic Characteristics and Stain Measurements, Proceedings of the conference on the SPIE Symposium on Smart Structures and Materials, 2009.

Jun Teng, Anzhi Yan, Zhixiong Lu. The Nonlinear Problems on the Development of the Performance of SATMD in Applications(Invited paper), Proceedings of the Intelligent Sensors and Actuators Symposium at Earth & Space 2008 Conference, 2008.

Jun Teng, Zhijun Dong, Zuohua Li. The study on the energy response spectrum compared with pseudo acceleration spectrum under earthquake(Invited paper), Proceedings of The Ninth International Symposium on Structural Engineering for Young Experts, 2008.

Jun Teng, Zhijun Dong, Zuohua Li. Research on energy spectrum of elastic SDOF, The proceedings of the 14th World Conference on Earthquake Engineering, 2008.

Jun Teng, Zhixiong Lu, Anzhi Yan. Study on the sensitivity of impact parameter of TMD under different excitations, Proceedings of the International Conference on Vibration Engineering, 2008.

Jun Teng, Yiqing Xiao, Hongjun Liu, Wei Lu. The Hardware and Software Implementation of the Health Monitoring System for Large Span Space Structures (Invited Paper), Proceedings of the International Conference on Health Monitoring of Structure, Material and Environment, 2007.

Jun Teng, Wei Lu, Hongjun Liu, Yanhuang Zhu. Information Aacquisition Method Based on Space Similarity Structure. Proceedings of World Forum on Smart Materials and Smart Structures Technology, 2007.

Jun Teng, Mingyi Qin, Wei Lu, Liu Hongjun. Study on Wind Pressure Distribution of Large Span Space Structures with Complicated Shapes and Inner Pressure of Holed, Proceedings of the 12th International Conference on wind Engineering, 2007.

Jun Teng, Qin Mingyi, Yanhuang Zhu, Wei Lu. Wind Pressure Distribution Rules for Complicated Roof Structures with Holed Surface, Proceedings of World Forum on Smart Materials and Smart Structures Technology, 2007.

Jun Teng, Botao Ma, Zuohua Li and Hongjun Liu. Study on a New VE-Damper for Mitigation Wind-Induced Oscillation, Proceedings of 4th World Conference on Structural Control and Monitoring, 2006.

Jun Teng and Hongjun Liu.The Theory and Application of the Intelligent Health Monitoring System to Large Span Complicated Space Truss Structures with Wind-induce, Proceedings of 4th World Conference on Structural Control and Monitoring, 2006.

An-Zhi Yan, Jun Teng, Hui Xu, Zhi-Xiong Lu. Response analysis of rotating beam with moving mass. the proceeding of 15th national Structure Engineering, 2006.

Jun Teng, Chang-wei Yan, Bo-tao Ma, Hong-jun Liu. Study on the Identification of Fluctuating Wind Pressure in SHM for Large-span Structures, Proceedings of 4th China-Japan-US Symposium on Structural Control and Monitoring, 2006

Zhixiong Lu, Jun Teng, Anzhi Yan. Wavelet transform algorithm for wind response control of buildings with Tunable TMD, Proceedings of 4th China-Japan-US Symposium on Structural Control and Monitoring, 2006

Jun Teng, Zhixiong Lu, Hongjun Liu.The New Seismic Design Method for Complicated Structures Based on the Seismic Isolation Technology, Proceedings of 4th China-Japan-US Symposium on Structural Control and Monitoring, 2006.

Anzhi Yan, Jun Teng, Zhixiong Lu. Analysis for the Seismic Response of Wutong TV-Tower with Variable Stiffness Tuned Mass Dampers, Proceedings of the 4th International Conference on Earthquake Engineering, 2006.

Jun Teng, Zuohua Li, Xingfa Wang, Hongjun Liu, Xiaofeng Wang. Comparison of Different Elastic-Plastic Analysis Methods of Complex High-rise Structures under Strong Earthquake Excitations, Proceedings of the 4th International Conference on Earthquake Engineering, 2006.

Hongjun Liu, Jun Teng. Vibration Control of Seismic Response for Hifh-Tech Building Facilities, Proceedings of the 4th International Conference on Earthquake Engineering, 2006.

Jun Teng, Botao Ma, Bai-Sheng Rong, Hong-Jun Liu, Zuo-Hua Li. Study on the New Viscoelastic Damper Based on Bending and Dislocating, Proceedings of The Ninth International Symposium on Structural Engineering for Young Experts, 2006.

Jun Teng, Weilian Qu, Hongjun Liu. The Theory and Application of the Intelligent Health Monitoring System to Large Span Complicated Space Truss Structures with Wind-induced, Proceedings of the Fourth World Conference on Structural Control and Monitoring, 2006.

Jun Teng, Zuohua Li, Botao Ma, Hongjun Liu. Mechanics Analysis and Experimental Study on the Energy Dissipation Damper Based on Bending and Dislocating, Proceedings of the Fourth World Conference on Structural Control and Monitoring, 2006.

Jun Teng, Hongjun Liu, Wei Lu & Yanhuang Zhu. Intelligent Sensor system for the structural health monitoring, Proceedings of The 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure, 2005.

Jun Teng & Hongjun Liu. Compensation Technique for the Structural Health Monitoring System, Proceedings of The 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure, 2005.

Peng Liu, Hongjun Liu, Jun Teng & Tianyi Cao. Optimal placement of sensors for structural health monitoring, Proceedings of The 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure, 2005.

Teng Jun, Liu Hongjun. Optimum design of the control devices for adjacent structures under earthquake excitation, Proceedings of the 20th IEEE International Symposium on Intelligent Control, ISIC '05 and the 13th Mediterranean Conference on Control and Automation, MED '05, 2005.

Jun Teng, Hongjun Liu. Optimum Design of the Control Devices for the Adjacent Structures under Earthquake Excitation, Proceedings of IEEE International Symposium on Intelligent Control, Proceedings of 2005 International Symposium on Intelligent Control & 13th Mediterranean Conference on Control and Automation (2005 ISIC-MED) , 2005.

Jun Teng, Hongjun Liu. The Reduced Order Optimum Method for the Placement and Control Law Design of Control Devices Between Two Adjacent Structures, Proceedings of the conference on the SPIE Symposium on Smart Structures and Materials, 2005.

Weilian Qu, Jun Teng, Haifan Xiang, Luo Zhong, Hui Li, Jing Wang, Shujin Li, Gongbiao Li. The Study and Application of Intelligent Method of Health Monitoring for the Large Span Complicated Space Truss Structures under Wind Load, Proceedings of the Third China-Japan-US Symposium on Structural Health Monitoring and Control and Fourth Chinese National Conference on Structural Control , 2004.

Jun Teng, Hongjun Liu, Weilian Qu, Hardware System of Intelligent Sensors and Health Monitoring, Proceedings of the Third China-Japan-US Symposium on Structural Health Monitoring and Control and Fourth Chinese National Conference on Structural Control , 2004.

Jun Teng, Hongjun Liu. Wind-Induced Vibration Control for the Mast of TV Tower, Proceedings of the Third China-Japan-US Symposium on Structural Health Monitoring and Control and Fourth Chinese National Conference on Structural Control , 2004.

Hongjun Liu, Jun Teng. Modeling of Smart Dampers for Vibration Control, Proceedings of 2004 International Conference on Intelligent Mechatronics and Automation, 2004.

Jun Teng, Weilian Qu and Hongjun Liu. The Application Method of the Intelligent Sensor Systems for the Structural Health Monitoring systems, Proceedings of the Eighth International Symposium on Structural Engineering for Young Exports, 2004.

Jun Teng, Hongjun Liu and Weilian Qu. Error Compensation Technique for the Structural Health Monitoring Sensor Systems, Proceedings of the Eighth International Symposium on Structural Engineering for Young Exports, Science Press, 2004.

Jun Teng, Youlin Xu, Optimum Design for the Number, Placement and Parameters of the Control Devices for Tall Buildings under Earthquake Excitation, Proceedings of the Seventh International Symposium on Structural Engineering for Young Experts, 2002.

Jun Teng. The Application Research For The AMD Vibration Control of Shenzhen Diwang Commercial Building, Proceedings of International Workshop on Seismic Isolation, Energy Dissipation and Control of Structure, 1999.

Jun Teng, Ji Liu. Vibration Control System of Multi-structure Connection and Its Optimal Design, Proceedings of International Conference on Structural Control, 1998.

Jun Teng, Ji Liu. Control Devices Optimal Installment for New Vibration Control System of Multi-structure Connection, Proc. of 10WCEE, 1992.

Jun Teng, Ji Liu. Quality Analysis for Vibration Control Systems and Optimal Design for D-V feedback Control System, Proceedings of US/CHINA/JAPAN Trilateral Workshop on Structural Control, 1992.

Ji Liu, Jun Teng. The Adaptive Random Control of Structures under Earthquakes, Proceedings of the International Conference of Vibration Problems on Engineering (ICVPE), 1990.
TEACHING/SUPERVISING EXPERIENCE
School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Courses: Earthquake Engineering and Structural Seismic Design, Structural Passive Vibration Control, High-rise Building Structural Systems
School of Civil and Environmental Engineering, Harbin Institute of Technology Shenzhen Graduate School
Peng Zhihan, 2013-, Master Degree from South China University of Technology, PhD student, is working on 'Simulation of High-ride Building Structure on Multi-scale'.

Yu Yaoyao, 2012-, Bachelor Degree from Harbin Institute of Technology, Master student.

Wen Runfa, 2012- Bachelor Degree from China University of Mining and Technology, Master student.

Zhou Qiushi, 2012-, Bachelor Degree from Harbin Institute of Technology, Master student.

Gao Chunming, 2012-, Bachelor Degree from Liaoning Technical University, Master student.

Chen Liangjun, 2012-, Bachelor Degree from Tongji University, Master student.

Cui Yan, 2012-, Bachelor Degree from Shenzhen University, Master student.

Shi Weixiao, 2012-, Bachelor Degree from Harbin Institute of Technology, Master student.
Ye Liyu, 2012-, Bachelor Degree from Harbin Institute of Technology, Master student.

Deng Lin, 2012-, Master Degree from Guangxi University, PhD student, is working on 'Design Methodology for Structural Energy Dissipation and Seismic Mitigation'.

Chen Liang, 2012-, Master Degree from Shenyang Jianzhu University, PhD student, is working on 'Structural Design Theory against Rare Earthquake'.

Liu Pengyuan, 2011-, Bachelor Degree from Harbin Institute of Technology, Master student, is working on 'Reliability Analysis and Optimization on Diagrid Tube Structure Based on Response Surface Methodology'.

Zhang Yajie, 2011-, Bachelor Degree from Harbin Institute of Technology, Master student, is working on 'Research on Elaborated Damage Model of RC Beam and Column Based on Material Damage'.

Wang Lishan, 2011-, Bachelor Degree from Harbin University of Science and Technology, Master student, is working on 'The Method of Damper Composite Coupling beam of Engineering Applications'.

Zhang He, 2011-, Bachelor Degree from Shenzhen University, Master student, is working on 'Research on Refinement Analysis Based on the Structural Engineering Software'.

Hao Linfei, 2011- Bachelor Degree from Tongji University, Master student, is working on 'Research on the Damage Model of Shear Wall Members Based on Materail Damage'.

Zhang Zhen, 2011-, Bachelor Degree from Harbin Institute of Technology, Master student, is working on 'Seismic Performance Research of Precast Columns in High-rise Buildings'.

Wu Fengqi, 2011-, Bachelor Degree from Harbin Institute of Technology, Master student, is working on 'Stress Identification of Large Span Space Structure Based on Multi-Type Sensors'.

Li Hongyu, 2010-, Master Degree from Guangxi University, PhD student, is working on 'Nonlinear Analysis on RC Structure Based on GPU Heterogeneous Platform'.

Xing Houbing, 2009-, Master Degree from Harbin Institute of Technology, PhD student, is working on 'Seismic Control on High-ride Building Structure'.

Lv Haixia, 2008-, Master Degree from Harbin Institute of Technology, PhD student, is working on 'Structural Failure Mechanism under Rare Earthquake Based on Multi-scale'.

Shen Xuanzhao, 2007-, Master Degree from Institute of Engineering Mechanics, China Earthquake Administration, PhD student, is working on 'Comfort Degree of Beam and Slab Structure under Pedestrian Induced Vibration'.

Zhen Cai, 2010-2012, Master Graduate, worked on ABAQUS MODELING METHOD RESEARCH BASED ON STRUCTURE ENGINEERING SOFTWARE.

Qi Jiang, 2010-2012, Master Graduate, worked on RESEARCH ON PSEUDO-STATIC TEST OF THE DIAGRID TUBE STRUCTURE AND THE PERFORMANCE OF NODE.

An Li, 2010-2012, Master Graduate, worked on PLASTIC-DAMAGE UNIAXIAL CONSTITUTIVE MODEL FOR CONFINED AND RATE-DEPENDENT CONCRETE.

Yanbo Han, 2010-2012, Master Graduate, worked on DIAGRID TUBE STRUCTURAL SEISMIC DAMAGE EVALUATION METHOD BASED ON MEMBER SCALES.

Mingliu Yang, 2010-2012, Master Graduate, worked on UNIFIED ANALYSIS METHOD OF VIBRATION ABSORBER AND VIBRATION ISOLATION.

Feng Qiao, 2010-2012, Master Graduate, worked on OPTIMAL DESIGN OF PASSIVE DAMPERS BASED ON POLE ASSIGNMENT.

Jiangbo Li, 2010-2012, Master Graduate, worked on PARAMETRIC MODELING METHOD IN ABAQUS FOR HIGHRISE RC STRUCTURE.

Qiudi Cao, 2009-2011, Master Graduate, worked on FRAME-CORE TUBE STRUCTURAL SEISMIC DAMAGE EVALUATION METHOD BASED ON MEMBER SCALES.

Dongxue Cao, 2009-2011, Master Graduate, worked on STUDY ON STRUCTURAL FAILURE MODES FOR RC FRAME STRUCTURES UNDER SEVERE EARTHQUAKE.

Yingliang Qiu, 2009-2011, Master Graduate, worked on CONSTRUCTION SIMULATION AND LONG-TERM EFFECTS OF CONSTRUCTION SCHEMES OF SUPER HIGH-RISE BUILDING.

Hao Zhang, 2009-2011, Master Graduate, worked on SEISMIC BEHAVIORS RESEARCH ON DIAGRID TUBE SUBSTRUCTURE STANDARD UNIT.

Xirui Jiang, 2009-2011, Master Graduate, worked on RESEARCH ON SEISMIC PERFORMACE EVALUATION METHOD OF STEEL FRAME-CONCRETE CORE CUBE BASED ON DAMAGE INDEX.

Jiang Wang, 2008-2010, Master Graduate, worked on FORMULA RESEARCH OF HOW TO REPLACE THE CURVED GIRDER BRIDGE BY THE STRAIGHT BRIDGE AND COMPREHENSIVE ANALYSIS OF MULTI—FACTOR.

Jianhua Chen, 2008-2010, Master Graduate, worked on Monitoring Data Based Damage Assessment of High Frame-core Tube Structures.

Yannan Feng, 2008-2010, Master Graduate, worked on SYSTEM RELIABILITY ANALYSIS OF REINFORCED CONCRETE FRAME BASED ON ACCURATE STOCHASTIC FINITE ELEMENT MODEL.

Peng Dong, 2008-2010, Master Graduate, worked on ANALYSIS ON PRESTRESSED SPACE MECHANICAL PERFORMANCE OF CURVED BRIDGE WITH HIGH-PIER AND SMALL-RADIUS.

Xing Zhao, 2008-2010, Master Graduate, worked on EXPERIMENTAL RESEARCH AND DESIGN METHOD OF BENDING AND DISLOCATING DAMPER.

Yanrong Hu, 2008-2010, Master Graduate, worked on SEISMIC PERFORMANCE ANALYSIS AND DESIGN OF REINFORCED CONCRETE INFILLED FRAME STRUCTURE.

Ting Zhang, 2008-2010, Master Graduate, worked on STRESS IDENTIFICATION ON THE KEY REGION OF LARGE SPAN SPACE STRUCTURE.

Zhi Liu, 2008-2010, Master Graduate, worked on SPATIAL STEEL STRUCTURAL DAMAGE ALARMING BASED ON STATISTICAL PATTERN RECOGNITION.

Xiuying Li, 2007-2009, Master Graduate, worked on NUMERICAL SIMULATION OF WIND PRESSURES ON AND WIND ENVIRONMENT AROUND OPEN SPATIAL STRUCTURES.

Maojie Chen, 2007-2009, Master Graduate, worked on OPTIMUM DESIGN AND VERIFICATION FOR STRUCTURAL SEISMIC BASED ON THE VISCOUS DAMPER.

Weihua Li, 2007-2009, Master Graduate, worked on EXPERIMENTAL STUDY AND APPLICATION FOR COUPLING-BEAM DAMPER OF SHEAR WALL STRUCTURE.

Yunjun Lu, 2007-2009, Master Graduate, worked on RESEARCH ON MODAL PARAMETERS IDENTIFICATION FOR LARGE SPAN SPATIAL STEEL STRUCTURE AND ENVIRONMENTAL VARIABILITY.

Houbing Xing, 2007-2009, Master Graduate, worked on PARAMETER INFLUENCING ANALYSIS OF DYNAMIC CHARACTERISTICS OF CABLE-STAYED STRUCTURES.

Zhen Zeng, 2007-2009, Master Graduate, worked on STUDY ON FORCE BEHAVIOR OF COMPLEX COMPONENTS BASED ON THE LIMITED MEASURING POINTS.

Qi Na, 2006-2008, Master Graduate, worked on ANALYSIS ON SPACE MECHANICAL PERFORMANCE OF HIGH-PIER AND SMALL-RADIUS CURVED BRIDGE.

Zhipeng Pan, 2006-2008, Master Graduate, worked on RESEARCH AND APPLICATION OF REINFORCED CONCRETE EQUIVALENT MATERIAL.

Zhijun Dong, 2005-2010, Ph.D. Graduate, worked on RESEARCH ON THE SEISMIC PERFORMANCE ESTIMATION AND SYSTEM RELIABILITY FORREINFORCED CONCRETE STRUCTURE.

Zhixiong Lu, 2005-2009, Ph.D. Graduate, worked on APPLICATION AND STUDY OF MASS DAMPER VIBRATION CONTROL FOR HIGH-FLEXIBLE STRUCTURE.

Zuohua Li, 2005-2009, Ph.D. Graduate, worked on DAMAGE MODEL AND SEISMIC DAMAGE DESCRIPTION OF HIGH-RISE REINFORCED CONCRETE STRUCTURES.

Xiaofeng Wang, 2005-2007, Master Graduate, worked on SECONDARY DEVELOPMENT OF REINFORCED CONCRETE NONLINEAR MODEL BASED ON ABAQUS.

Fengxiong Chen, 2005-2007, Master Graduate, worked on Research On Vertical Acceleration Analysis And Vibration Control Of Steel Pedestrian Bridge Acting By Human Walking Load.

Wenting Li, 2005-2007, Master Graduate, worked on OPTIMUM DESIGN FOR STRUCTURAL VIBRATION CONTROL SYSTEM BASED ON THE QUADRATIC PERFORMANCE INDEX.

Wei Zheng, 2005-2007, Master Graduate, worked on RESEARCH ON MECHANICS OF INTERACTION BETWEEN TRANSFER BEAM AND SUPPORTED SHEAR WALL.

Yanhuang Zhu, 2004-2010, Master and Ph.D. Graduate, worked on PARAMETER IDENTIFICATION AND DAMAGE ALARMING FOR LARGE SPAN SPATIAL STEEL STRUCTURE UNDER AMBIENT EXCITATION.

Wei Lu, 2004-2010, Master and Ph.D. Graduate, worked on THE STRUCTURAL HEALTH MONITORING SYSTEM OF LARGE SPAN SPACE STRUCTURE BASED ON FIELDBUS.

Botao Ma, 2004-2009, Master and Ph.D. Graduate, worked on PASSIVE ENERGY DISSIPATION CONTROL STRATEGIES OF HIGH-RISE STRUCTURES BASED ON ENGINEERING CASES.

Mingyi Qin, 2004-2006, Master Graduate, worked on WIND PRESSURE DISTRIBUTION RULE AND WIND-INDUCED INTERNAL PRESSURE OF LARGE SPAN SPACE STRUCTURE.

Changwei Yan, 2004-2006, Master Graduate, worked on IDENTIFICATION OF THE TIME-HISTORY OF FLCTUATING WIND PRESSURE IN SHM FOR LARGE-SPAN STRUCTURE.

Feng Gao, 2003-2005, Master Graduate, worked on QUANTITIVE ANALYSIS FOR WIND CONTROL SYSTEM AND DYNAMIC RELIABILITY ANALYSIS OF TV-TOWER STRUCTURES.

Hongfeng Li, 2003-2005, Master Graduate, worked on SENSOR FAULT DIAGNOSIS AND SIGNAL RECONSTRUCTION OF STRUCTURAL MONITORING SYSTEM.

Changpu Li, 2003-2005, Master Graduate, worked on STUDY ON WIND-INDUCED VIBRATION CONTROL FOR TV-TOWER AND THE CONTROL DEVICE ON LINE HEALTH MONITORING.
Updated:2018-01